DOUBLE JEOPARDY ANSWER KEYPhoto 1
Violation: Lack of fall protection at height above 6 feet.
Standards violated: 1926.501(b)(1), 1926.701(b), 1926.451(g)(1), and 1926.451(e)(1).
Corrective action: Provide standard guardrail protection.
Photo 2
Violation: Lack of fall protection at height above 6 feet.
Standard violated: 1926.501(b)(1).
Corrective action: Provide guardrail system, safety net system, or personal fall arrest system.
Photo 3
Violation: Lack of fall protection.
Standard violated: 1926.501(b)(13).
Corrective action: Provide fall protection (see directive STD 3-0.1A for Group 4).
Photo 4
Violation: Hazard of fall from improper use of forklift.
Standard violated: (5)(a)(1) of the Occupational Safety and Health Act: Hazard of fall while using rough terrain forklift to access roof.
Corrective action: Use ladders or supported scaffolds instead of forklift.
Photo 5
Violation: Unstable scaffolding support.
Standard violated: 1926.451(c)(2).
Corrective action: Provide adequate scaffold support.
Photo 6
Violation: Lack of fall protection.
Standard violated: 1926.501(b)(13).
Corrective action: Provide fall protection (see directive STD 3-0.1A for Group 4).
Photo 7
Violation: Lack of fall protection for employees 10 inches above lower level; no safe access.
Standards violated: 1926.451(g)(1) and 1926.451(e)(1).
Corrective action: Provide competent person to oversee erection of fully planked scaffold platform with a guardrail system and safe access.
Photo 8
Violation: Employee struck by forklift when it fell over.
Standard violated: 1910.178(l)(1)(i).
Corrective action: Train forklift operators to use the vehicle properly, with forks lowered, and how to handle soft soil.
Photo 9
Violation: Cover plate missing on switches (shock hazard).
Standard violated: 1910.305(b)(2).
Corrective action: Replace cover plate.
Photo 10
Violation: Outlet box missing cover, and metal box used as extension cord.
Standard violated: 1910.305(b)(2) and 303(b)(2).
Corrective action: Extension cord taken out of service.
Photo 11
Violation: Failure to crib boom during crane removal (worker crushed).
Standard violated: ANSI B30.5-1968 for truck cranes.
Corrective action: Block or crib boom during disassembly.
Photo 12
Violation: Exposure to silica.
Standards violated: 1910.134(f), 1910.134(e), 1926.55(a), 1926.55(b), and 1926.701(b)
Corrective action: Use a wet cutting process to reduce the amount of respirable silica
dust generated from cutting masonry blocks.
Photo 13:
Violation: Lack of cave-in protection.
Standards violated: CFR 1926.652(a)(1), 1926.651(j)(2), and 1926.100(a)
Corrective action: Provide adequate protection from caveins, such as a trench box, shoring, or sloping. Ensure that employees wear the appropriate head protection (hard hat).
Photo 14
Violation: Lack of cave-in protection.
Standard violated: 1926.652(a)(1).
Corrective action: Provide a trench box or shoring.